NAD C298 Stereo Power Amplifier
RM13,831.00
- 185 watts per channel into 8 ohms (20-20,000 Hz) at 0.005% THD with 2 channels driven
- 340 watts x 2 into 4 ohms
- 620 watts x 1 into 8 ohms (bridged mode)
- 4-ohm stable for use with a wide range of speakers
- Class D amplifier design with HybridDigital Purifi Eigentakt™ technology
- signal-to-noise ratio: 120 dB
- stereo balanced XLR and unbalanced RCA inputs
- stereo RCA line output for connecting a separate amplifier or powered subwoofer
Pure power
The NAD C298 delivers an impressive 185 watts per channel, and it's 4-ohm stable so it can drive a wide array of demanding speakers. In bridged mode, this powerhouse offers 620 watts into a single channel. You can connect your source via unbalanced RCA or balanced XLR inputs.
Innovative amplifier technology
But with NAD, you're getting more than high wattage numbers. This amp offers pristine Class D amplification thanks to HybridDigital Purifi Eigentakt™ technology. It helps the amp maintain even frequency response into lower impedance loads, and minimizes the occurrence of digital clipping. Of course, it also offers robust power output and accurate sound with minimal distortion, for a listening experience that NAD calls "analog-like."
ANALOG AUDIO INPUT/LINE OUT
- THD (20 Hz – 20 kHz)
- <0.0005 % at 2V out
- Signal-to-Noise Ratio
- >120 dB (IHF; 20 Hz – 20 kHz, ref. 2V out)
- Channel separation
- >110 dB (1 kHz)
>100 dB (10 kHz) - Input impedance (R and C)
- Single-ended: 56 kohms + 280 pF
Balanced: 56 kohms +280 pF - Maximum input signal
- >7.0 Vrms (ref. 0.1 % THD)
- Output impedance
- 390 ohms
- Frequency response
- ±0.1 dB (20 Hz – 20 kHz)
- Maximum voltage output -IHF load
- ≥>7.0 V (ref. 0.1 % THD)
ANALOG AUDIO INPUT/SPEAKER OUT
- Rated output power into 8 Ohms and 4 ohms (Stereo mode, ref. 20 Hz-20 kHz at
rated THD, both channels driven)
- 185 W at 8 ohms
340 W at 4 ohms - Rated output power into 8 Ohms
(Bridge mode, ref. 20 Hz-20 kHz
at rated THD, both channels driven) - 620 W at 8 ohms
- THD (20 Hz – 20 kHz)
- <0.005 % (1 W to 185 W, 8 ohms and 4 ohms)
- Signal-to-Noise Ratio
- >98 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>120 dB (A-weighted, ref. 185 W out in 8 ohms) - Clipping power (Stereo mode, at 1 kHz 0.1 % THD)
- >200 W
- Clipping power (Bridge mode, at 1 kHz 0.1 % THD)
- >690 W
- IHF dynamic power (Stereo mode, at 1 kHz 1 % THD)
- 8 ohms: 260 W
4 ohms: 490 W
2 ohms: 570 W - IHF dynamic power (Bridge mode, at 1 kHz 1 % THD)
- 8 ohms: 1000 W
4 ohms: 1100 W - Peak output current
- >25 A (in 1 ohm, 1 ms)
- Damping factor
- >800 (ref. 8 ohms 20 Hz – 6.5 kHz)
- Frequency response
- ±0.2 dB (20 Hz – 20 kHz)
-3 dB at 60 kHz - Channel separation
- >100 dB (1 kHz)
>80 dB (10 kHz) - Stereo Mode input sensitivity (for 185 W in 8 ohms)
- Fixed Gain mode: 1.43 V
- Stereo Mode Gain
- Fixed Gain mode: 28.6 dB
- Line In – Balanced and Single-ended
- Variable Gain mode: 8.5 dB – 28.5 dB
- Bridge Mode Sensitivity
- Fixed Gain mode: 3.78 V for 620 W in 8 ohms
- Line In – Balanced and Single-ended
- Variable Gain mode at maximum: 1.41 V for 620 W in 8 ohms
- Bridge Mode Gain
- Fixed Gain mode: 25.4 dB
- Line In – Balanced and Single-ended
- Variable Gain mode: 14.5 dB – 34.5 dB
- Standby power
- <0.5 W
DIMENSION AND WEIGHT
- Gross dimensions (W x H x D)
- 435 x 120 x 390 mm (17 1/8 x 4 3/4 x 15 3/8 inches)
- Net weight
- 11.2 kg (24.7 lbs)
- Shipping weight
- 13.6 kg (30 lbs)
Additional information
| Weight | 15 kg |
|---|---|
| Dimensions | 46 × 14 × 43 cm |
Reviews
There are no reviews yet.