NAD C 316BEE V2 Stereo Integrated Amplifier
RM2,299.00
- 40 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.03% THD
- 4-ohm stable for use with a wide range of speakers
- signal-to-noise ratio: 100 dB
- PowerDrive-S™ technology for more dynamic power output
- large toroidal power transformer for a strong, low-noise power supply
- rotary bass and treble controls with defeat switch for tone control bypass
- 5 RCA audio inputs including 1 MM phono input
Praise for the NAD C 316BEE from The Absolute Sound
"The entry-level C 316 is still the go-to amp for audiophile newbies who crave sonic neutrality, good power output, nice tactile feel, and NAD's characteristic quality-control."
— The Absolute Sound 2013 Editors' Choice Awards: Integrated Amplifiers under $1000
The foundation of a simple, yet great-sounding stereo system
You don't need huge power or a lot of buttons to push. You don't need to spend a lot of money, either. If all you want is great sound for a small space, NAD has the solution. The C 316BEE is the perfect little integrated amp to anchor that high-quality audio system in your den, bedroom, or office. It delivers accurate, musical sound in a compact, easy-to-enjoy package.
No frills, just thrills
NAD designed this amp using the same principle behind their higher-end components — a no-frills approach that puts the focus squarely on performance, instead of bells and whistles. It boasts a high-current toroidal transformer — usually found only on expensive audiophile gear — and other carefully selected parts to provide punchy, lifelike sound. It makes the amp sound much more potent than its 40-watts-per-channel rating would lead you to expect.
This integrated amp offers enough inputs to connect five audio components, including a turntable, plus a handy front-panel minijack for hooking up a portable music player. And the included remote gives you easy control of the amplifier and the other NAD audio components in your system.
Line In / Headphone Out
- THD (20 Hz – 20 kHz)
- <0.03 % in 300 ohms at 2 V out
- Signal-to-Noise Ratio
- >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)
- Frequency response
- ±0.3 dB (20 Hz – 20 kHz)
- Output impedance
- 8 ohms
Line In / Speaker Out
- Continuous output power into 8 ohms and 4 ohms
40W (ref. 20 Hz-20 kHz at rated THD, both channels driven) - THD (20 Hz – 20 kHz)
<0.03 % (250 mW to 40 W, 8 ohms and 4 ohms)
- Signal-to-Noise Ratio
- >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>97 dB (A-weighted, 500 mV input, unity gain in 32 ohms) - Clipping power (at 1 kHz 0.1 % THD)
- >45 W in 8 ohms
>60 W in 4 ohms - IHF dynamic power
- 8 ohms: 90 W
4 ohms: 120 W
2 ohms: 170 W - Damping factor
- >200 (ref. 8 ohms, 1 kHz)
- Frequency response
- ±0.3 dB (20 Hz – 20 kHz, Tone Defeat ON)
Treble: ± 5dB at 10 kHz
Bass: ± 8 dB at 100 Hz - Channel separation
- >70 dB (1 kHz)
- Maximum input level
- 4.3V (1 kHz THD 0.1%)
- Input sensitivity (for 40 W in 8 ohms)
- 200 mV
- Standby power
- <0.5 W
Phono In / Speaker Out
- THD (20 Hz – 20 kHz)
- <0.03 % (1 W to 40 W, 8 ohms and 4 ohms)
- Signal-to-Noise Ratio
- >75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms)
- Frequency response (RIAA deviation)
- +0.3 dB (20 Hz – 20 kHz, Tone Defeat ON)
- Maximum input level
- 71 mV (1 kHz THD 0.1%)
- Input sensitivity (for 40 W in 8 ohms
- 2.95 mV
Dimension and Weight
- Gross dimensions (W x H x D)
- 17 1/8 x 3 9/16 x 11 1/4 inches
435 x 90 x 285 mm - Net weight
- 5.5 kg (12.1 lbs)
- Shipping weight
- 6.4 kg (14.1 lbs)
Additional information
| Weight | 7 kg |
|---|---|
| Dimensions | 45 × 30 × 10 cm |
Reviews
There are no reviews yet.